If your home or business in Ammon uses an irrigation system, backflow prevention isn’t optional—it’s required to protect your drinking water and stay in compliance with state and local regulations. Yet many homeowners aren’t aware that their sprinkler system could put their water supply at risk if it’s not properly protected.
At YardTech, Inc., we provide certified backflow prevention services throughout Ammon, ID. From selecting the right device to annual testing and emergency repairs, we make it easy to keep your system safe, compliant, and worry-free.
What Is Backflow—and Why Should Ammon Homeowners Be Concerned?
Backflow occurs when water flows in the reverse direction—pulling dirty or contaminated water from your lawn, garden, or sprinkler system back into your clean water supply. This can happen due to pressure changes in the water main, often during hydrant use or water line breaks.
Contaminants like fertilizers, pet waste, pesticides, and bacteria can easily be pulled into the drinking water line if a proper backflow prevention device isn’t installed. That’s why every sprinkler system in Ammon needs a reliable, tested backflow preventer in place.
Ammon Follows the Same Backflow Standards as Idaho Falls
Ammon follows state-adopted plumbing codes that mirror those in nearby Idaho Falls. That includes the provisions outlined in Section 603.3, which state:
- All backflow assemblies must meet approved standards and be acceptable to the local Administrative Authority
- Each device must be clearly identified and labeled by the installer
- Certified testers must inspect and test the device at installation, after repairs, and at least once per year
- Testing must be done by a licensed backflow tester according to Table 14-1 standards
Homeowners are responsible for ensuring their systems stay up to code—not just once, but every year.
Which Backflow Devices Are Approved for Ammon Irrigation Systems?
YardTech installs and services the full range of approved backflow preventers, ensuring that your irrigation system is protected based on its design and risk level.
The most common devices we work with include:
- Atmospheric Vacuum Breakers (AVBs): Best for simple systems with no pumps or chemical injection
- Pressure Vacuum Breakers (PVBs): Durable and reliable for most residential systems without backpressure
- Reduced Pressure Zone Assemblies (RPZs): Required for systems with pumps, fertilizer injectors, or other pressurizing components
We’ll inspect your system, determine which device is appropriate, and ensure it’s installed to code—complete with the clearance, elevation, and labeling required by law.
Annual Backflow Testing Services in Ammon
Backflow prevention devices are mechanical—and like anything mechanical, they need to be tested to ensure proper function. Ammon requires annual backflow testing, performed by a certified tester.
Our testing service includes:
- Pressure testing the device using calibrated equipment
- Verifying that check valves and relief valves function properly
- Providing complete documentation for your records or local submission
- Recommending repairs or replacements if the assembly fails
Many homeowners are surprised to learn that these tests aren’t optional. We make it easy by offering convenient scheduling, fast service, and documentation that keeps you protected.
Signs Your Backflow Device May Be Failing
While many failures are caught during routine testing, some signs can show up before then. Call YardTech if you notice:
- Water pooling near your backflow device
- Visible rust, corrosion, or leaking fittings
- Sprinkler zones that don’t operate as expected
- Water that smells or tastes off (a potential sign of contamination)
Don’t ignore the warning signs. A failing backflow device can create serious health risks and may result in fines if your system is inspected and found out of compliance.
Why YardTech Is Ammon’s Top Choice for Backflow Services
Ammon may be a smaller community, but your sprinkler system still needs the same high level of protection found in larger cities. YardTech brings professional-grade expertise, licensed testers, and local experience to every home we serve.
What you get with YardTech:
- Certified testers familiar with Ammon and Bonneville County codes
- Fast and reliable annual testing service
- Correct installation of all backflow preventers
- Friendly, local service backed by years of irrigation experience
- The option to bundle with fall winterization or spring startup for savings
We know the local soil conditions, seasonal weather, and water system infrastructure—so we install with real-world knowledge, not guesswork.
Now Is the Time to Schedule Your Test or Installation
If you haven’t had your backflow system tested this year—or don’t even know if you have a certified assembly in place—it’s time to call YardTech. Fall is the perfect time to handle your annual testing, especially if you’re already thinking about winterizing your irrigation system.
Don’t put off protecting your home’s water supply. Scheduling takes just a few minutes, and the peace of mind lasts all year.
YardTech, Inc – Your Preferred Sprinkler System Contractor in East Idaho
Backflow prevention is critical in Ammon and required by code. YardTech, Inc. provides certified backflow installation, testing, and repairs to help homeowners stay compliant and safe. Whether your system needs its first test or you’re ready to upgrade to a safer device, we’re here to help. Contact us today to book your service.
Featured Photo by Connor McManus from Pexels